SolutionsGroundScope GSX1000GroundScope PortalUtilitiesConstructionGovernmentCompanyAboutLeadershipFAQsResourcesDocumentationVisit SmartAugerContactRequest a demoPre-orderGet in touch
Request a demoPortal sign-in

GroundScope GSX1000 · For users in the United States

FCC coordination: file with the FCC before you operate

The GSX1000 is an ultra-wideband (UWB) ground penetrating radar. Federal rules require the user to notify the FCC before the equipment is used (47 CFR 15.525). GroundScope is required to tell you this (47 CFR 15.525(c)); the notice in the box and this page are that notification.

Create your form

Fill in the fields and download the completed form as a PDF. Nothing you type leaves your browser; the PDF is built on your device. Print it, sign it, and mail it to the address below.

Who may operate

Ground penetrating radars may be operated only for purposes associated with law enforcement, fire fighting, emergency rescue, scientific research, commercial mining, or construction, and the operating party must be eligible for licensing under Part 90 of the FCC rules (47 CFR 15.509(b)). Operation by any other party is a violation of federal law.

What to do

  1. Create the form below (it fills in the PDF for you), download the blank form, or use the paper copy on the back of the notice in the box.
  2. Fill in your company name and address, a contact name and phone number, the area of operation (states or counties; for a fixed site, the address), the equipment (GroundScope GSX1000, the FCC ID from the label on the radar head, and the unit ID in the form GS-0000000), and the date you received the unit.
  3. Mail the completed form to the FCC. Keep a copy. Do not send it to GroundScope.
Mail toFrequency Coordination Branch, OET
Federal Communications Commission
45 L Street NE
Washington, DC 20554
Attn: UWB CoordinationAddress per 47 CFR 0.401(a). Older manufacturer notices also list fax 202-418-1944; we have not confirmed that number is still in service.

After you file

  • Routine coordination takes no longer than 15 business days from the date NTIA receives the request (47 CFR 15.525(f)).
  • The FCC/NTIA report may name areas where operation is prohibited or where additional local coordination is required. Follow it.
  • If your operating areas change, file updated information. If you transfer the unit to another qualified user or a new location, coordinate the change with the FCC first (47 CFR 15.525(d) and (e)).
  • Emergency operations involving the safety of life or property may proceed without prior coordination under the notification procedure in 47 CFR 15.525(f).

FCC compliance statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by GroundScope, Inc. could void the user's authority to operate the equipment. The FCC ID is printed on the label on the radar head.

Is there an official FCC form?

No. The rule prescribes what the notice must contain (your name, address and contact information, the geographic area of operation, and the FCC ID and model of the device), not a form. There is no FCC form number or online filing system for this notice. The GroundScope form carries every item 47 CFR 15.525(b) lists, in the same layout other GPR manufacturers have used since 2002.

On September 9, 2026 the FCC proposed to eliminate this written coordination requirement (Notice of Proposed Rulemaking, ET Docket No. 26-245). That is a proposal. Until a final rule takes effect, the notice is still required before you operate. GroundScope will update this page when the rule changes.

Rule text: 47 CFR 15.525, 47 CFR 15.509, 47 CFR 0.401. Questions: support@groundscope.com. FCC notice r1 · 2026-10-26.